On session number one we’re just going to talk about that general overview. Again we’re going to do a deep dive on speed power and frequency.
Prerequisite
This will get you off to a great start!
0/1
Class 1 : Speed – Power – Frequency
On session number one we're just going to talk about that general overview. Again we're going to do a deep dive on speed power and frequency.
0/8
Class 2 : Adobe Illustrator
We're going to be migrating over to Adobe Illustrator. Now this is where 90% of everyone struggles. You can't do anything really on a laser until you get a template. So we're going to do a deep dive into that.
0/7
Class 3 : 2.5d Engraving
0/4
Class 4: Test Generator and Non-Metals
On today's lesson, we're going to take a little bit of a deeper dive inside of Light Burns test generator. Now we're going to be working with nonmetals. A lot of metals are very similar, but you'll see when you get outside of that you'll be having to use this tool a whole lot. So hopefully it comes in handy. I'll see you guys there.
0/5
Class 5: Jewelry / Cutting
I'm pretty excited about today's class. Today we're making jewelry. Now this just goes hand in hand with just cutting in general. Now we are going to be using a method called offset. I'm not the biggest fan of wobble because I feel like it's not as accurate as this method. Our method will be a little bit slower, but it's very important to have the best quality.
0/7
Class 6: Firearms Deep Engraving
Now, today might be the moment so many of you may have been waiting for it. We're going to do our first firearm. It is going to be a test. Blaine provided by somebody in the laser groups. We'll supply his name below. Now, not only will we be doing a deep engraving on this, but you get to watch me go through Adobe and stack through this artwork. Don't get intimidated. Remember to take it slow and always just take notes. See you guys there.
0/6
Class 7: Multi Color Engraving
On today's class, we're going to do multiple color engraving on a P-Mag. Now this same technique can be applied to stainless steel or anything else. We'll provide a couple of test charts to go along with this video. It's going to be a fun one. See you there.
0/6
Class 8: Firearms Porting
On today's class, we're going to be playing a little bit more of the firearms. We're going to do some more cutting specifically porting. We're going to actually have something floating in the center of our port. We're just going to use our logo. It'll work with any vector. We'll also have a bunch of artwork that you can practice with.
0/5
Bonus: Bitmaps
Before we wrap things up, we have a little surprise. We're going to talk about bitmaps today. We're not going to be making them from scratch, but we're going to talk about how to upload them into light burden. Talk about your layer count and how to get the best overall results and future lessons. We will cover how to make them.
We're going to have a blast! See you.
0/1
Bonus : Photo Engraving
As many of you may know, this may be my least favorite thing to do because the results can be so left or right sided. Now we're going to do a couple examples of photo engraving. Now results will vary tremendously, but we're going to at least show you the process and how I bring it in and go about testing throughout this process.
0/1
Final Wrap Up
Now that we wrapped everything up, I just want to say thank you so much. Understand that this is also just the beginning. We plan on unveiling a series that covers 3D modeling, a deep dive into firearms, and so much more. Please join Beam Squadron on Facebook and show us what you're working on. We will be. Keep an eye out for this. And we'll have a live chat that will that will come to the website soon. All right. Thank you guys so much!
0/1
